November 1, 2020

Choosing a Power Supply for Your LED Strip Lights

In case you are buying LED Strip Lights don’t forget your own power supply. LED Strip Lights rely on the peripheral unit called a power provide, also referred to as a transformer or car owner, which is needed to make them work.

Power supplies come in many shapes and sizes, which range from very basic ‘plug and play’ products to commercial style transformers which can be hardwired into your mains supply. You will also hear these power supplies referred to as ‘transformers. ‘ This is because as well as powering the LED Strip Lights these products are designed to ‘transform’ the mains 230V AC to a low voltage 12V DC therefore making the provide applicable to the strip lights.

There are a few considerations you need to make when it comes to choosing the type of power supply you need. If you are you looking for more information on LED Strip light check out our own web-page.

Firstly, do you wish to be able to plug into a wall outlet, or are you planning to hardwire your own LED Strip Lights into a light change?

If the answer to the former question is ‘yes’ then you will require a standard ‘plug and play’ driver. This is the simplest supply available and allows quick and easy setup for standard domestic apps via a wall plug power supply. The entire unit consists of a black transformer, a kettle-lead with a standard UNITED KINGDOM mains 3-prong plug and a 12V male connector which attaches to the LED Strip via a corresponding female connection. The entire unit closely resembles the lap top charger and is about 2 metres in length.

For more complicated applications or where there is no wall structure plug available an alternative mains power provide is available. Instead of a kettle lead these supplies feature a length of mains cable which can be wired directly up to the mains supply.

In addition to choosing the type of power, you will also need to determine the size of this. These supplies come in varying sizes, ranging anywhere from a low 20watts to numerous times this figure. These numbers described the maximum ‘load’ that the provide can manage. The ‘load’ of the LED Strip Lights is calculated if you take the wattage per metre plus multiplying it by the number of metres you are using. For example , if the power consumption per metre is 7. 2W and you are using 10 metres, then your complete load is 72watts. It is important to make sure that this load does not surpass the maximum load on your supply, otherwise you will experience performance issues with your strip lights, such as voltage fall, and reduce the life span of your lights.

Leave a Reply

Your email address will not be published. Required fields are marked *